15Kw 48V Inverter
Inverter Output
Continuous Output Power: 15.0KW
Surge Rating (20Secs): 45.0KW
Output Waveform: Pure Sine Wave/Sam© Input (Bypass Mode)
Nominal Efficiency: > 88% (Peak)
Line Mode Efficiency: > 95%
Power factor: 0.9-1.0
Rated output voltage rms: 100-110-120Vac/ 220-230-240Vac
Output voltage regulation: ±10% RMS
Output frequency: 50Hz ±0.3Hz/60Hz ±0.3Hz
Short circuit protection: Yes (1 sec after fault)
Typical transfer time: 10ms (max.)
THD: < 3% (nominal battery level, full nominal linear charge)
DC Input
Nominal Input Voltage: 48.0 Vdc
Minimum Start Voltage: 40.0 Vdc/42 Vdc
Low Battery Alarm: 42Vdc/ 44.0Vdc
Low Battery Trip: 40.0 Vdc/ 42.0 Vdc
High Voltage Alarm: 64.0 Vdc
Low Battery Voltage Recovery: 62.0 Vdc
Standby Power Search Mode: < 25 W when Power Saver is enabled. (Refer to the table)
Charger
Output Voltage: Depends on battery type (Refer to Table 2.5.2)
Charger Circuit Breaker Rating: 100A
Maximum Charging Power Rate: 1/3 of rated power (Refer to Table 2.5.3)
Battery Initial Voltage for Cranking: 40-62.8VDC
S.D. Overcharge Protection: 62.8VDC
BMS
Battery Temperature Sensor (Optional): Yes (Refer to the table) Charge voltage and S.D. voltage base on battery temperature.
Bypass & Protection
Input Voltage Waveform: Sine Wave (Grid or Generator)
Nominal Voltage: 100-110-120Vac/ 220-230-240Vac
Maximum Input AC Voltage: 300Vac
Nominal Input Frequency: 50Hz or 60Hz
Low Frequency Trip: 47±0.3Hz for 50H 57±0.3Hz for 60Hz
High Frequency Trip 55±0.3Hz for 50Hz. 65±0.3Hz for 60Hz
Overload Protection (SMPS Load): Circuit Breaker
Output Short Circuit Protection: Circuit Breaker
Branch Breaker Rating: 100A
Transfer Switch Rating: 100A for UL.
Bypass without battery connected: Yes (optional)
Maximum bypass current: 80 Amp
Mechanical specifications
Mounting: Wall mounting
Inverter dimensions (LWH): 688415230mm
Inverter weight KG: 75
Shipping dimensions (LWH): 850520350mm
Shipping weight KG: 78
Display: Status LED / Status LED+LCD
Standard warranty: 1 year
