5Kw 48V Inverter
Inverter Output
Continuous Output Power: 5.0KW
Surge Rating (20Secs): 15.0KW
Output Waveform: Pure Sine Wave/Sam© Input (Bypass Mode)
Nominal Efficiency: > 88% (Peak)
Line Mode Efficiency: > 95%
Power Factor: 0.9-1.0
Rated Output Voltage rms: 100-110-120Vac/ 220-230-240Vac
Output Voltage Regulation: ±10% RMS
Output Frequency: 50Hz ±0.3Hz/60Hz ±0.3Hz
Short Circuit Protection: Yes (1 sec after fault)
Typical Transfer Time: 10ms (max.)
THD: < 3% (nominal battery level, full nominal linear charge)
DC Input
Nominal Input Voltage: 48.0Vdc
Minimum Start Voltage: 40.0Vdc/42Vdc
Low Battery Alarm: 42Vdc/ 44.0Vdc
Low Battery Trip: 40.0Vdc/ 42.0Vdc
High Voltage Alarm: 64.0Vdc
Low Battery Voltage Recovery: 62.0Vdc
Standby Power Search Mode: < 25W when Power Saver is enabled. (Refer to table)
Charger
Output Voltage: Depends on battery type (Refer to table 2.5.2)
Charger Circuit Breaker Rating: 40A
Maximum Charging Power Rate: 1/3 of rated power (Refer to table 2.5.3)
Battery Initial Voltage for Cranking: 40-62.8VDC
S.D. Overcharge Protection: 62.8VDC
BMS
Battery Temperature Sensor (Optional): Yes (Refer to table) Charge voltage and S.D. voltage base on battery temperature.
Bypass & Protection
Input Voltage Waveform: Sine Wave (Grid or Generator)
Nominal Voltage: 100-110-120Vac/ 220-230-240Vac
Maximum Input AC Voltage: 300Vac
Nominal Input Frequency: 50Hz or 60Hz
Low Frequency Trip: 47±0.3Hz for 50H 57±0.3Hz for 60Hz
High Frequency Trip 55±0.3Hz for 50Hz. 65±0.3Hz for 60Hz
Overload Protection (SMPS Load): Circuit Breaker
Output Short Circuit Protection: Circuit Breaker
Branch Breaker Rating: 40A
Transfer Switch Rating: 40A for UL.
Bypass without battery connected: Yes (optional)
Maximum bypass current: 40Amp
Mechanical Specifications
Mounting: Wall-mounted
Inverter Dimensions (LWH): 488415200mm
Inverter Weight KG: 48
Shipping Dimensions (LWH): 650520310mm
Shipping Weight KG: 50
Display: Status LED / Status LED+LCD
Standard Warranty: 1 year
